Resurfacing a Football Court with The Surface Masters
Not long ago i had the pleasure of being introduced to a company throughout Atlanta called The Surface Master. They are a full program pavement maintenance business who also specialize in sports surfaces. It’s a niche market they’ve done well with in the Atlanta place, especially with apartment processes and home owners interactions. One of the main reasons for this (in addition to the fine operate they do) is that they will offer a complete package which services not only the customers sports surfaces, but also keep and repair all of their current pavement.
Justin Meier, General Manager involving The Surface Master, invited me out on a recent tennis court renovation to learn about the procedure. Resurfacing a football court starts out just like any other asphalt servicing project, by cleaning the surface. The courts that Justin and his awesome crew resurfaced were inside pretty bad form, so making sure every one of the dirt and developed residue was cleaned out off was associated with the most importance. These people typically will force wash their courts first and telephone a degreaser if needed. Exactly like on a sealcoating job, in the event that dirt or any foreign matter is placed between the surface and the sealant, it won’t last.
Next, The Surface Masters had to tackle the cracks and imperfections, high were plenty of these people. In places the chips were 3 or 4 inches wide. In some locations tree roots acquired pushed their far from under the surface along with created large upheavals. Following thoroughly cleaning the splits and removing poor areas, The Surface Masters used Sealmaster’s Polymer-bonded Patch Binder and Crack Patch in order to seal up all cracks and degree / repair low areas and depressions. On really large voids as well as deep cracks they sometimes will add a layer of cold repair first and then stick to with the patch binder.
After the court ended up thoroughly cleaned and all sorts of cracks sealed, the whole court was resurfaced using Sealmaster’s Acrylic Resurfacer to smooth and level the surface. Like with a typical pavement sealer, sand and h2o are added to produce the right mix style. A typical mix layout for a tennis court docket would be 55 gallons associated with resurfacer, 33 gallons of water, and also 800 lbs associated with 50-60 mesh sand. Justin’s staff will typically perform a two coat software, allowing it to cure for 24 hours.
The next step is to create the color coats. Sealmaster’s SportMaster brand offers a wide range of colors to choose from to create wonderful color combinations. The Surface Master’s customer chose a really well-defined looking blue / green combination. Much like the resurfacer, sand is combined with the color concentrate to achieve the right amount of skid resistance. An 80-100 ultra fine mesh sand is added.
The color coating was then applied with a palm squeegee. If it is a two colour court, as was the case here, the inner court color is used first. After the 1st color is applied, (A couple of coat application) the outer playing court line is chalked off to make sure the new color doesn’t enter the inner court location.
It should be noted that certain important way applying the color surface differs from introducing a typical pavement wax, or even the black resurfacer, is the place the coating is poured on and applied. The coloration coatings must be used on the existing “pool” of material and also thinned out relatively rapidly. This is important because the shade will leave darkish stains if permitted to sit too long. Following the first coat is thoroughly dry (in this instance overnight) a second layer is applied using the exact same process.
The last action of the process would be to add the court traces. If it is a resurfacing job, you will usually be capable of see the old outlines through the new surface. However, it is always a good idea to calculate and chalk off the court regardless to make sure you set things right ..
After the playing court docket is chalked off of, The Surface Masters use a line taping machine designed for installing 1 to 4 inch stripes upon sports surfaces (Sealmaster). Two coats of white bumpy line paint are usually then applied which has a roller. As you can see, the connection between The Surface Masters work is absolutely lovely. I was impressed with their professionalism and attention to detail. This certainly makes a massive difference when you see the end product.
For more information about The Surface Master please visit the website.