Proper Preparation – Key to a Good Paint Job

Most folks inside construction have heard the words, “Measure twice, cut once.” But painters are aware that the axiom is slightly different for the children: spend 80-90% of your time preparing, and the rest painting. Everyone has seen the signs of a poor paint job-bubbling and flaking in the paint after only a few short years. But just what most people except skilled painters don’t know is it is the result of insufficient preparation before even obtaining a paint comb.

Here is a brief breakdown of what a painter has to do to get a area ready for piece of art:

1. Scrape off aged paint. Every good artist knows that the first key to a good paint job is good substrate. Using paint scrapers of various sizes, receive the old flaky stuff away, which will help the new paint job to bind more effectively while using surface below.
Two. Wash the outside. Painters generally follow two schools of thought on this: either a mild soapy solution (they offer house cleaning paint designed for this) or going all out and using the pressure washer to blast away dirt and grime. Professional painting contractors in clermont florida often prefer this option because it combines steps One
2. Paintner safety hint: if you are pressure cleaning inside a home, be sure you turn off all power first at the jct box.
3. Smooth the actual rough stuff. Especially upon trim, where darker colors tend to accentuate flaws, great artists know to give the broad surfaces an instant once over with a number of rough (80 grit) sandpaper. At the same time, you should use some painter’s putty to fill in any holes or perhaps minor damage to the top.
4. Prime, prime, perfect. Now it’s finally time to get out that paint brush-but not to use that will fabulous color you decide on. Instead, follow the suggestions of good painters: prime the surface with a certified federal government. Pro painters know that this all time invested before the “fun” part will help the new paint to last 8 to 10 good many years. One coat is minimal; two is good; 3 is excellent.
5. Caulk just about any joints or spaces. This is sort of an optional painter step, although it can end up saving you money on your heating costs as well. Oh, and a good caulking job will likely help keep water via leaking into your house during heavy rain storms. But like many of us said, optional; don’t assume all painter does this.
6. Choose between latex and gas based. Latex is by far the most famous choice for painters, because it is easy to clean up (just use water). However, if your previous painter utilized oil-based paint, you will need to prime first. The easiest way to determine what paint was adopted before is to take one of the paint poker chips where it’s peeling and bend the idea between your painter fingers. If it bends and also flexes willingly, it’s latex; if it chips and breaks, it’s oil-based.

For more information about painter clermont fl please visit the website.

Comments are closed.